The glass cleaning water filling Machine combined water bottle filling and capping into 2 in 1 machine. It is suitable for both plastic polyester bottle (PET bottle) and glass bottle with screw caps for non-aerated carbon dioxide drinks such as mineral water, pure water, non-gas water, spring water and so on. The water filling machine design could shorten the time for the drink material contact with outside, increase the sanitation condition throught economy benefit.
The machine adopts advanced Simens PLC and touch screen to ensure stable running. The empty bottles adopt air conveyor transfering to the 3 in 1 machine, and output bottles adopt flat conveyor with inverter to make sure the water filling machine speed adjustable.
* Easy operation and maintenance;
* Advanced Siemens PLC and touch screen;
* Gravity Filling with high capacity;
* Italy technology capping more precision.
* Belt type cap uploader with new tehnolgy avoid cap blocking.
Maintenance of automatic water filling machine:
Every shift of production shall carry out an overall clean of machine and the inspection of the fixing parts to ensure no looseness either at beginning or at the end.
If the meshing of gears is not satisfactory the remedy work shall be carried out and lubricate the gears with grease at last.
When the seasonal production is finished or any temporal stop of production happens in a year, an overhaul shall be carried out and the wearing-and-tearing parts should be replaced ensuring the satisfactory production of next term.
1) When cleaning, forbid any water spray over rotating or electrical parts;
2) Bottles and caps shall accord with technical requirement and any discord ones shall be forbidden to be applied lest causing mechanical failure;
3) Each interconnecting of drive-and-driven pairs shall be precisely adjusted lest any bottle-blocking will occur;
4) Regular inspection of lubrication spots and ensuring satisfactory lubrication.