CGF18-18-6 Automatic Filling Machine For Water (5000-6000BPH) CGF18-18-6 Automatic Filling Machine For Water (5000-6000BPH)

Material: SUS304/SUS316,
Capacity: 5000-6000 bottles/hr for 500ml
Min Order: 1 set
Siemens PLC & touch screen.

Quantity:
Share this:
Model: CGF18-18-6
Brand: BORUN
Code: 8422301090
  • Product Description

The CGF18-18-6 automatic water filling machine combined water bottle washing system, filling system and capping system into 3 in 1 monoblock. It is suitable for both plastic polyester bottle (PET bottle) and glass bottle with screw caps for non-aerated carbon dioxide drinks such as mineral water, pure water, non-gas water, spring water and so on. The water filling machine design could shorten the time for the drink material contact with outside, increase the sanitation condition throught economy benefit.


The machine adopts advanced Simens PLC and touch screen to ensure stable running. The empty bottles adopt air conveyor transfering to the 3 in 1 machine, and output bottles adopt flat conveyor with inverter to make sure the water filling machine speed adjustable. 

Features:

* Easy operation and maintenance;

* Advanced Siemens PLC and touch screen;

* Gravity Filling with high capacity;

* Italy technology capping more precision.

* Belt type cap uploader with new tehnolgy avoid cap blocking.


Technical Parameters:

Model

CGF18-18-6

Rinsing heads

18

Filling heads

18

Capping heads

6

Capacity based   on 500ml PET bottle

5000-6000BPH

Suitable   bottle height (mm)

160-320

Suitable   bottle diameter (mm)

¢50-¢115

Compressed   air pressure

0.3-0.7MPa

Washing Water   pressure (Mpa)

0.06MPa,≤0.2MPa

Motor   Power

3.5KW

Dimension(mm)

2600*1920*2550mm

Weight(kg)

3500

Maintenance of automatic water filling machine:

Every shift of production shall carry out an overall clean of machine and the inspection of the fixing parts to ensure no looseness either at beginning or at the end.

If the meshing of gears is not satisfactory the remedy work shall be carried out and lubricate the gears with grease at last.

When the seasonal production is finished or any temporal stop of production happens in a year, an overhaul shall be carried out and the wearing-and-tearing parts should be replaced ensuring the satisfactory production of next term.

Notes:

1) When cleaning, forbid any water spray over rotating or electrical parts;

2) Bottles and caps shall accord with technical requirement and any discord ones shall be forbidden to be applied lest causing mechanical failure;

3) Each interconnecting of drive-and-driven pairs shall be precisely adjusted lest any bottle-blocking will occur;

4) Regular inspection of lubrication spots and ensuring satisfactory lubrication.


Call Us
Email
×

Contact Us

captcha